Jntech JNP1K1L-G, Руководство пользователя

Страница: 79 / 86

71
Fault111 Inverter shut down
Sensor not
connect proper or
damaged
If this happen frequently,
please contact Our company.
Fault112
Inverter shutdown,
non-recover
malfunction. No
automatically
restart, only if
recharged
Output wire
short circuit.
1. Please check if there is
short circuit in output wires.
2. If this happen frequently,
please contact Our company.
Fault115
Inverter shutdown
and will restart
automatically after
the fault
disappears.
Phase loss in
inverter output
1. Please check if the output
wires are proper connected
and fixed.
2. If this happen frequently,
please contact Our company.
Fault 200
AC input
over-voltage.
Inverter stops,
and display AC
over-voltage.
1.AC power source is
unstable, with high voltage;
2. Inverter internal damage.
Fault201
AC input
low-voltage
1. AC power
source cannot
work as
pass-by when
there is no solar
energy input
2. with low solar
energy, AC
1.AC IN side circuit breaker
be off;
2. AC power voltage is low.