Jntech JNP1K1L-G, Руководство пользователя

Страница: 59 / 86

51
The following describes the operation information, basic information, pump
information, statistical information, and fault information.
8.3.1.1 operation information
The items in the operation information show the current operation information
of the inverter. The following table explains each item in detail.
Figure8-3 The meaning of main interface parameters
Parameters Instructions
Ppv PV input power (W ).
R-Mode Operation mode, MPPT.
Ipv PV input current (A).
Vdc DC Bus input voltage (V).
Pgrid Grid input power (W ).
State_AC State of Grid input.
Iaout Inverter A phase current (A).
Fout Inverter output current frequency (Hz).
Run/Stop
Run or stop state.
Run: Inverter running.
Stop: Inverter stop, and pump stop work.
D-Mode
Dry mode of PV pump system: “AUTOMATIC” doesn’t need
external water level sensor, “DETECTION” need external water
level sensor.
OF-F The optional function of overflow alarm in PV pump system.