Jntech JNP1K1L-G, Руководство пользователя

Страница: 72 / 86

64
8.3.4 Parameter Setting
Before entering the parameter setting, you need to enter the correct password.
After entering
，
you could set the information items given in the 8.3.2 Setting
information item description
Here set the
“
language setting
”
as an example.
1) Locate the "Language Settings":
According to "Figure 8-2 LCD Menu Box Figure 2", the "Language Settings" is
under the "Parameters Settings" menu.
2) "Language Settings" is to set information items. The specific steps are as
follows:
Operation step and LCD display description
Main Menu
Password *0
ESC
or
Settings
Fault Inquiry
Settings
Password **
ESC
RunInfo
InverterInfo
RunInfo
1.Press enter in the main
interface to enter the main menu,
and the cursor falls on the running
information item.
2.Press up or down to find
parameter settings item
3.Press enter to enter the
parameters parameter settings. The
entry parameter settings need to
input the correct two-digit
password.
initial default password is 00