CYP SY-P291, Руководство по эксплуатации

Страница: 1 / 8

SY-P291 PC/HD to
PC/HD Scaler Box
Operation Manual
SY-P291
1.Introduction
This Scaler Box is designed to upscale PC/HD input sources to PC/HD output of
wide-range PC/HD resolutions; the resolution is up to WUXGA/1080p. This unit
has a comprehensive OSD menu that allows user to select a variety of output
resolutions and adjust for best picture quality.
2. Features

Scales any PC/HD resolutions to PC (VGA ~ WUXGA)/HD (480i ~ 1080p)
resolutions.

Provides output picture adjustment on contrast, brightness, hue, saturation,
sharpness, RGB (color tone) level and aspect ratio size.

Supports high resolution output:
PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA.
SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p.

Supports YPbPr/RGBHV input/output.
1 Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
2 PC/HD Output: Connect the PC output D-Sub (15-pin) port to the D-Sub
input port of your display.
3 Menu Button: Press the MENU button to bring up OSD operation menu.
(See section “4. OSD Operation” for reference.)
4 +/- Button:
1 On the first tier of OSD menu, use + and – buttons to move up/down
the highlight item for selection.
2 Once the desired option is selected, use + and – buttons to toggle
between setting values.
Note: Reset: Press [MENU] and then [ - ] to switch to 480p mode.
Press [MENU] and the [ + ] to switch to XGA mode.
1 2 3 4
DC 5V
PC / HD
OUTPUT
MENU
+
-
PC / HD PC / HD
3.2 Rear Panel