Jireh STIX, Руководство пользователя

Страница: 26 / 53

PAGE 21 of 47
BG0104 Rev 03.3
4.8.1. Cable Management Dovetail Mount
Multiple dovetail mount locations are available on the wheel block handles. To attach
the cable management, follow these steps:
1. Loosen the knob on the cable management dovetail mount. Attach the
mount onto the dovetail of the wheel block with handle
(Fig. 69-1)
.
2. Tighten the cable management knob
(Fig. 69-2)
when the cable
management dovetail mount is positioned where required.
4.8.2. Cable Management Setup
The cable management is offered in a variety of lengths and provides a means
of bundling and protecting cables and hoses that run to the scanner.
1. Open the cable management tube and cable latch. Begin at the tube’s
dovetail mount and place the cabling in the tube
(Fig. 70)
.
2
1
Fig. 69
- Mounting cable management
Fig. 70
- Insert cables and hoses
Fig. 71
- Zip up to close