Jetter JVM-507B - HMI, Руководство пользователя

Страница: 44 / 152

44 Jetter AG
5 Mounting and installation of the JVM-507B
5.4 IP configuration
This chapter describes the IP configuration. The following parameters can be
set:
 IP address of the HMI

Subnet mask
 IP address of default gateway
 IP address of DNS server

HMI name
 IP port number for the JetSym debugger
 Basic port number for communication via JetIP
To configure the device, knowledge of IP networks is required, such as
 IP addressing (IP address, port number, subnet masks etc.)
Topic Page
Factory settings ............................................................................................. 45
The configuration memory ............................................................................ 46
Configuration registers .................................................................................. 47
Setting the IP address via registers to be non-volatile ................................. 48
Setting the IP address during runtime .......................................................... 50
Making settings on the device web site ........................................................ 51
Introduction
Required skills of the
network configurator
Table of contents