Jetter JVM-507B - HMI, Руководство пользователя

Страница: 51 / 152

Jetter AG 51
JVM-507B Mounting and installation of the JVM-507B
Making settings on the device web site
The page Settings of the device web site lets you configure both, the Ethernet
and the CANopen® interface.
The table below lists the steps for setting the IP address (example):
Step Action
1 In line IP click the button Edit .

The edit box for the IP address opens.
2
Enter the new IP address into the edit box.
3
Confirm your input by clicking the button .
To undo your input, click the button Undo. .
4 Click the button Save.

This will save all the settings.
5
Power cycle the device.
Result: The device can be reached at the new IP address.
Page Settings