Engine Air Cleaner Filter Installation
NOTE:
Inspect and clean the housing if significant dirt or
debris is present before replacing the engine air
cleaner filter.
1. Install the engine air cleaner filter into the housing
assembly with the engine air cleaner filter inspec-
tion surface facing downward.
2. Tighten engine air cleaner filter cover fasteners
using a suitable tool.
CAUTION!
Do not overtighten the engine air cleaner filter cover
lid screws or damage may result.
First Water Separation Chamber
Removal — 6.4L Engine
The vehicle is equipped with a hood duct system for
filtering out water, dirt and debris to keep them out of
the engine air cleaner filter. The first water separation
chamber can be removed for cleaning if necessary.
Removal
1. Loosen the six captured fasteners from the first
water separation chamber using a suitable tool.
NOTE:
The captured fasteners are made to stay with the
first water separation chamber and must NOT be
removed.
2. Pull on the hood duct at the top to disengage the
push pin clip along with the rubber grommet and
remove from vehicle.
Installation
NOTE:
Inspect and clean the housing if dirt or debris is pres-
ent before reinstallation.
1. Align the first water separation chamber to hood/
second chamber then engage the push pin clip and
grommet.
NOTE:
Both components should click-in. The cone shape of
the second chamber can aid in locating parts.
2. Hand start the six captured fasteners.
3. Tighten the captured fasteners. Do not overtighten.
First Water Separation Chamber
1 — Captured Fasteners
First Water Chamber Removal
First Water Separation Chamber
1 — Push Pin
2 — Grommet (On The Backside)
SERVICING AND MAINTENANCE
295
8
5538906_24_JL_OM_EN_USC_t_E1.pdf 295
5/22/2023 9:02:30 AM