CAUTION!
•
Careless handling and storage of the half-doors
may damage the seals resulting in water leaks into
the interior of the vehicle.
•
The upper half-doors must be positioned properly
to ensure sealing. Improper installation can cause
water leaks into the interior of the vehicle.
•
Store the zipper pulls of the upper half-door win-
dows at the upper B-pillar area for both front and
rear doors to avoid damage to the windows when
not in use.
•
Do not attempt to operate the half-door zipper in
temperatures of 41°F (5°C) or below. Damage to
the window may occur.
Use this QR code to access your digital
experience.
This vehicle may be equipped with half-
doors. To install the half-doors in the
vehicle, follow the instruction sheet
packaged in the box the doors were
received in. Replacement parts may be
purchased through Mopar® Service.
To install the front or rear half-doors, proceed as
follows:
1. Remove the full doors from the vehicle. For front
door removal, see
page 45. For rear door
removal, see
2. Locate the upper and lower hinge pins on the lower
half-door, and lower them into the body hinges on
the vehicle.
NOTE:
The upper hinge pin is longer, which can be used to
assist in guiding the door into place during
installation.
3. Insert the upper and lower hinge pin screws into the
body hinges. Tighten the screws using a #T50 Torx
head driver to 3.8 ft· lb / 5.2 N·m.
CAUTION!
•
Do not close the door before reattaching the door
check to the body. Damage may occur to the door
check.
•
Do not overtighten Torx fasteners, damage to the
vehicle’s parts will occur.
(Continued)
CAUTION!
•
Hinge pins can break if overtightened during door
install (Max Torque: 6.0 ft· lb/8.1 N·m).
4. Attach the cloth strap of the lower half-door to the
metal hook just inside the vehicle.
Scan me
Lower Half-Door Hinge Pins
Cloth Strap Attachment
1 — Metal Hook
2 — Cloth Strap
GETTING TO KNOW YOUR VEHICLE
51
2
5538906_24_JL_OM_EN_USC_t_E1.pdf 51
5/22/2023 9:02:18 AM
