CAUTION!
The Sentry Key Immobilizer system is not compatible
with some aftermarket Remote Start systems. Use of
these systems may result in vehicle starting problems
and loss of security protection.
All of the key fobs provided with your new vehicle have
been programmed to the vehicle electronics
NOTE:
A key fob that has not been programmed is also consid-
ered an invalid key.
IGNITION SWITCH
KEYLESS ENTER ‘N GO™ IGNITION
This feature allows the driver to operate the ignition
switch with the push of a button as long as the key fob
is in the passenger compartment.
The START/STOP ignition button has several operating
modes that are labeled and will illuminate when in posi-
tion. These modes are OFF, ACC, RUN, and START.
The push button ignition can be placed in the following
modes:
OFF
•
The engine is stopped.
•
Some electrical devices (e.g. power locks, alarm,
etc.) are available.
ACC
•
Engine is not started.
•
Some electrical devices (e.g. climate controls,
heated seats, etc.) are available.
RUN
•
Driving position.
•
All electrical devices are available.
START
•
The engine will start.
NOTE:
In case the ignition switch does not change with the
push of the START/STOP ignition button, the key fob
may have a low or depleted battery. In this situation, a
backup method can be used to operate the ignition
switch. Put the nose side of the key fob (side with the
mechanical flip key) against the START/STOP ignition
button and push to operate the ignition switch.
CAUTION!
•
Do not press the mechanical key against the
START/STOP ignition button.
•
Do not use sharp metal objects (e.g. screwdriver
etc.) to pry the button out of the ignition switch.
This button comes as an assembly, and is not
removable. This can damage the silicone shield.
START/STOP Ignition Button
1 — OFF
2 — ACC
3 — RUN
Backup Starting Method
34
GETTING TO KNOW YOUR VEHICLE
5538906_24_JL_OM_EN_USC_t_E1.pdf 34
5/22/2023 9:02:17 AM