Jedo Trim, Руководство пользователя

Страница: 9 / 26

user manual | EN user manual | EN
1. ASSEMBLING THE STROLLER
Release the safety lock, securing the
frame from unfolding
(Photo no.1)
The
unfolding of the stroller is performed by
pulling the handle up, when it reaches the
correct position, it automatically locks in
a locking clamp, accompanied by a clearly
audible „click” sound.
2. ATTACHING AND REMOVING THE
WHEELS
To remove rear wheels, press the button
on the inside of the frame (in front of
the brake)
(Photo no.2)
and remove the
wheel along with the axle. Repeat for the
other side. To re-attach, push the button
for disengaging the wheels and push the
wheel axle into the hole in the frame.
(Photo no.3) . Then release the button
and pull them together until they lock.
- Install the front 10 „wheel with the fork,
by inserting the axle forks into the rotary
element, until you hear a click of the
wheel locking into its correct position.
The front wheels may be locked to run
straight-ahead only, by turning the lock
mechanism of wheels located on both
sides of the frame, under the footrest
(Photo no.4) to the left (looking from the
handle) until it clicks.
To remove the front wheel, press the
gray button on the inside of the frame,
just below the rotary element locking the
front wheels
(Photo no.5)
WARNING! The wheels are covered with
a lubricant, which may stain textiles.
WARRANTY CONDITIONS
1. P.P.H.U. Jędroch grants warranty for the
purchased JEDO product, for a period of
24 months from the date of purchase.
2. Complaints should be reported at the
point of sale of the product.
3. The product subject to complaint must
be returned clean and securely packed,
in a cardboard box, preferably with the
instruction manual attached.
4. Product faults detected during the
warranty period will be repaired free of
charge within 14 days from the date of
delivery by Reseller to the Manufacturer.
5. The guarantee period is extended by
the repair time.
6. The means of repair are determined by
the guarantor.
7. It is necessary for the complaint to
be considered to provide the proof of
purchase, including date and signature of
both parties.
8. The manufacturer will remove any pos-
sible malfunction of the product, provided
is has been used as intended and recom-
mended by the manual.
9. Entries in the warranty card may only
be made by service technicians, otherwise
it may be rendered void. Lack of printed
warranty card excludes warranty services.
10. The territorial coverage of the warran-
ty covers the area of the European Union,
Norway, Switzerland and the Russian
Federation.
11. Warranty for consumer goods sold does
not exclude, limit or suspend the rights of
the buyer arising from the incompatibility
of the goods.
THE WARRANTY DOES NOT COVER
• Damage resulting from improper storage
• Mechanical and technical damages
caused by improper use or use not in ac-
cordance with the instruction manual.
• Color changes (discolorations) in fabrics
resultant from bright sunlight or im-
proper use of chemicals.
• Natural wear and tear of mechanical
components resulting from operation.
Performing any self-made structural
alterations to the product will void the
warranty.
• Any discoloration caused by contact of
rubber with the ground (e.g. PVC, lino-
leum, wooden lacquered parquet).
• Punctures to the inner tubes of
the wheels.
3. ENGAGING THE BRAKES
The stroller is stopped by pressing the
brake pedal, positioned at the right wheel
(handle side –
(Photo no.6)
).
Release the brake by pushing the identical
brake pedal, positioned at the left wheel.
4. ASSEMBLY / REMOVAL
OF THE CARRY COT
Assemble the carry cot on the chassis by
inserting the plastic carry cot adapters,
located in its lower part, into the central
locking mechanism. Locking will occur au-
tomatically. To remove the carry cot, press
buttons simultaneously on both sides of
the carry cot
(Photo no.7)
, then lift the
carry cot up.
WARNING! Before use, check if the carry
cot is properly locked in the central lock-
ing mechanism.
5. INSTALLATION OF THE FOOT COVER
Put the foot cover on the carry cot and
fasten using the press-studs on the sides
of the cupola and the cover.
• The „T” line extendable cover element
must be clipped to the booth by means
of magnets in its interior.
• The „R” line extendable cover element
may be clipped to the booth with a
magnet located at the top of the hood,
under the sun-roof.