![background image](http://html2.mh-extra.com/html/jcm/wba-series/wba-series_operation-and-maintenance-manual_3549776088.webp)
JCM Part No. 960-000076R_Rev. 1
© 2007, JCM-American Corporation
A - 1 2
Appendix A
World Bill Acceptor (WBA®-1x/2x -SS & SS2)
Troubleshooting
Return Code Error Table
Table A-12 lists the WBA-1X/2X Return Error Codes.
Table A-12
WBA-1X/2X Return Error Code Table
Return Error Codes
Flash
Error
Count
Description
Possible Cause
Follow-up Test
(Refer to Table A-5)
1
Crooked Insertion
Entrance Sensors
Test #6 - Entrance Sensors
2
Magnetic Pattern Error Center
Center MAG Sensor
None
3
Detected Bill in Pathway at Idle (Standby)
HPL, HPR, HPC, or Transport
Entrance Sensor
Test #6 - Head Sensor, #7
Entrance
4
Data Amplitude Error (The dark-light ratio
of the bill is below the fixed value)
All IR Sensors (Possible power
Supply).
Test #6 - Head Sensor, #7
Transport
5
Timing Error:
1. The Bill did not reach the Sensor
within the Specified Period of Time
2. The HPL HPR, did not select the bill
within the specified period after it was
initially drawn in.
3. The Feed-in Sensor did not detect the
bill within the specified period of time
following draw in.
HPL, HPR, HPC, Transport
Entrance Sensor or Encoder
Sensor
Test #6 - Head Sensors, #7
Transport Entrance Sensor,
Validator Encoder
6
Reserved
N/A
N/A
7
Error in a Photo Sensor Level
Clean and Calibrate
Test #6 - Head Sensors, #7
Transport Sensors
8
Level Error; the Bill was unusually dirty or
two overlapping Bills occurred
Entrance Sensors
Test #6 - Head Sensor
9
Return Command by DIP Switch
Check DIP Switch Settings
None
10
Return Command by the Host
Check Machine Settings
None
11
Solenoid Lever Trouble
Solenoid Lever or Solenoid
Sensor
Test #5 -Solenoid Test, #7
Solenoid Sensor
12
The Sensors Detect Movement in the
Wrong Direction During Bill Transfer to the
Cash Box:
1. None of the HPR, HPC, or HPL
detects a Bill when the type of bill
signal is output.
2. The Feed-in Sensor stops detecting a
Bill before the HPC Sensor during a
transfer of the Bill to the Cash Box.
3. The HPC Sensor detected a bill again
during transfer of a Bill to the Cash
Box.
HPL, HPR, HPC, or Transport
Entrance Sensor
Test #6 - Head Sensor. #7
Transport Entrance Sensor
13
The Bill is of a Length other than Specified HPL, HPR
Test #6 - Head Sensor
14
Color Pattern Error
HPL, HPR, HPC (Red
Component)
Test #6 - Head Sensors
15
Magnetic Pattern Error Left or Right
Left or Right MAG Sensor
None