![background image](http://html2.mh-extra.com/html/jcm/wba-series/wba-series_operation-and-maintenance-manual_3549776041.webp)
JCM Part No. 960-000076R_Rev. 1
© 2007, JCM-American Corporation
4 - 9
Disassembly/Reassembly
World Bill Acceptor (WBA®-1x/2x -SS & SS2)
Section 4
4. Remove the four (4) left side frame mount-
ing screws and separate the side from the
four frame supports (See Figure 4-31 d).
5. Remove the Lower Timing Belt when the
frame side has been separated (See Figure 4-
32).
Cash Box Disassembly
Pusher Mechanism Removal
Perform the following steps to remove the WBA
Cash Box Pusher Mechanism:
1. Remove the two (2) Pusher Mechanism
mounting screws (See Figure 4-33 a) and
carefully pull the pusher mechanism unit out
of the Cash Box frame (See Figure 4-33 b).
Pusher Mechanism Cover Removal
Perform the following steps to remove the WBA
Cash Box Pusher Mechanism Cover:
1. Remove the six (6) Pusher Mechanism
Cover mounting screws located on each side
of the pusher mechanism assembly
(See Figure 4-34 a).
2. Lift the Pusher Mechanism Cover up and off
the assembly (See Figure 4-34 b).
Pusher Mechanism Timing Belt Removal
Perform the following steps to remove the WBA
Cash Box Pusher Mechanism Timing Belts:
1. Remove the two (2) self tapping screws
located on each side of the Pusher Mech-
anism housing and remove the Coupling
Bracket Handle (Figure 4-35 a & b).
2. Remove the two (2) Drive Gear securing
E-rings and lift the two gears from their
respective shafts (See Figure 4-36 a).
Figure 4-32
Lower Timing Belt Removal
a)
a)
b)
Figure 4-33
Pusher Mechanism Removal
a)
a)
b)
Figure 4-34
Pusher Mechanism Cover Removal
a)
a)
b)
Figure 4-35
Coupling Bracket Handle Removal