![background image](http://html2.mh-extra.com/html/jcm/wba-series/wba-series_operation-and-maintenance-manual_3549776024.webp)
JCM Part No. 960-000076R_Rev. 1
© 2007, JCM-American Corporation
2 - 4
Section 2
World Bill Acceptor (WBA®-1x/2x-SS & SS2)
Installation/Operation
Table 2-5
WBA-12/13,22&23-SS2 20 Pin Rear Panel Connector Pin Assignments
WBA-12/13,22&23-SS2 Rear Panel Connector
Pin
No.
Signal Name
*
I/O
†
Function
1
+12V POWER
+12V DC power
2
GROUND (Power)
0V DC Ground Plain
3
M. RES
In
Bill Acceptor master reset signal line
4
TXD
Out Transmit serial data signal output line from WBA
5
+12V DC I/F
+12V DC Interface Power
6
RXD
In
Receive serial data signal input line into WBA
7
GND I/F
Zero (0) Volt DC Interface power
8
NC
Reserved (No Connection)
9
NC
Reserved (No Connection)
10 NC
Reserved (No Connection)
11 NC
Reserved (No Connection)
12 NC
Reserved (No Connection)
13 GND
Ground
14 LED+
LED Drive (anode)
15 NC
Reserved (No Connection)
16 NC
Reserved (No Connection)
17 NC
Reserved (No Connection)
18 LED-
LED Drive (cathode)
19 NC
Reserved (No Connection)
20 NC
Reserved (No Connection)
*. I/O (input/output) is the terminal viewed from Bill Acceptor’s side.
†. Signal name, I/O, and function without parenthesis are for ID-003 interface.
Socket Jack: DRA-20PC-FO (JAE)
Contact Type: DO2-22-26P -10000 (JAE)
Socket Plug: DRA-20SC-FO (JAE)
Contact Type: DO2-22-26S -10000 (JAE)