![background image](http://html1.mh-extra.com/html/jcm/g-456e/g-456e_owners-manual_3554381089.webp)
89
9.74
PERSONAL REPORT PROGRAMMING
It's possible to define until four different groups of personal report, with everyone of
which it'll be possible to obtain, in automatic mode until five different reports (between those
available on the ECR and indicated in the following table to par. 9.74.1 of the following
page), they will be printed by the input of a single code of report (from 2 to 5, that one of the
personal report chosed).
With this function it will be possible, as an example, to have in automatic mode
the reports that normally come executed on the ECR without to have to remember all
the codes.
The personalized reports can be executed in "X" mode and also in "Z" mode.
P (50R) X/Time (AAA) X/Time
(BBB) X/Time
(CCC) X/Time
(DDD) X/Time
(EEE) SUB-TOTAL #
R
:
number of the personal report to be programmed (from 2 to 5), the
same number will be used in "X" or "Z" for the execution of the
personal report.
AAA :
number of the first report to link to personal report
BBB :
number of the second report to link to personal report
CCC :
number of the third report to link to personal report
DDD :
number of the fourth report to link to personal report
EEE :
number of the fifth report to link to personal report
Note :
F
at the "personal Reports" is possible to link quite all the reports available
in the ECR except :
1 An other personal Report
2 A code of individual report (therefore the reports with
code that begins with 4xx and/or 5xx)
3 A code of sequential report (therefore the reports with
code that begins with 6xx and/or 7xx)
F
if in a personal report it is necessary to insert less than 5 reports, to directly
press SUB-TOTAL key after the insertion of the last report code without to
confirm by the "X/Time" key.
Eg.:
(50R)---[X]---(AAA)---[X]---(BBB)---[X]---(CCC)---[Sub-Total]
KEY