30
Alphanumeric Display
Numeric Display
10)
Tenkey
6
-6-
press the key where to set the six
11)
Tenkey
7
-7-
press the key where to set the seven
12)
Tenkey
8
-8-
press the key where to set the eigth
13)
Tenkey
9
-9-
press the key where to set the nine
14)
X Key
-A-
press the key where to set the "X/by"
15)
CL Key
-b-
press the key where to set the "CL"
16)
#/NS Key
-C-
press the key where to set the "#/NS"
17)
After the repositioning of the "#/NS" key (that it is last of the obbligatory keys) the
display will visualize :
Alphanumeric Display
Numeric Display
END
18) At this point the "obbligatory keys" have been set in the new positions.
This function could, as an example, be useful in the case in which the operator is left
handed and therefore he desires to adapt the ECR's keyboard in complete way to its
requirements.
It's important to consider that at this point all the keys in the ECR's keyboard, except
obviously those "obbligatory keys" as soon as set on new positions, are not active and
therefore if pressed don't execute any operation (beep only) ; it'll be however obviously
possible, "the obbligatory" keys must already arranged and working, to execute the
configuration also of the other keys in the ECR's keyboard.
For the configuration of the keys necessary on the keyboard to follow the procedure
described in the following page, so :
9 9
X/Time
(........
Please be noted that with the key, at this point, we are already in "Prg." mode.
Please be noted that also the key "Key" is in this moment not present in the keyboard
of the ECR and therefore you are suggested to set it immediatly, because it is
obviously indispensable for the normal use of the machine.