86
9.66
HALLO MESSAGE PROGRAMMING
Like already pointed out in the previous paragraph (Par. 9.65), for each graphical
HALLO LOGO is possible to program a HALLO MESSAGE (text message) of 12 lines for
14 characters. The HALLO MESSAGE will be printed on the receipt near to the relative
HALLO LOGO.
The numeration of HALLO MESSAGE (text message) indicated in the following
programmation is reported to the numeration of HALLO LOGO (graphical logo) indicated
in the previous paragraph ; as an example, HALLO MESSAGE N. 19 programmed with the
procedure "P--(719)--...", will be printed in receipts together to HALLO LOGO N.19 (the
glasses) indicated on the previous page.
P (7MM) X/Time (AB) X/Time
(NN)
X/Time
(DDDD..D)
SUB-TOTAL
#
MM
:
Message number (from 01 to 50), must be used the same number of
HALLO LOGO indicated in the previous page, to which the text
message is wanted to print together.
AB
:
Maximum number of programmable lines of text in HALLO MESSAGE
(from 00 to 12).
It's necessary to pay particular attention to the
insertion of this data, because the lines number of the text message
limits also the printing length of graphical HALLO LOGO, so HALLO
Logo can be cut if the lines number is lower than Hallo Logo length.
NN
:
Number of the line to set in the message (from 1 to 12)
DDD..D :
Description to insert in the defined line (max. 14 characters).
Note :
F
in order to cancel the last character input to press E.C. key
F
in order to obtain the characters in double width press the key "." (decimal
point) immediately before the characters to program
F
in order to obtain the small characters press the R.M. key immediateley
before the characters to program
F
the space corresponds to 00 key (double zero).
KEY
for programming of successive line
description 14
characters