![background image](http://html1.mh-extra.com/html/jcm/g-456e/g-456e_owners-manual_3554381029.webp)
29
9.1.3 OBBLIGATO KEY POSITION CHANGING
Established that on G-556 the keyboard is completely programmable as far as
functions and disposition of keys, but it must take in consideration that a series of keys are
"obbligatory" for the fundamental functions of the ECR (Programmings of all the other
functions of keyboard).
For this reason, these keys can "be moved" from their default position but they
cannot be physically removed from the keyboard of G-556.
Above mentioned keys are :
0
1
2
3
4
5
6
7
8
9
X CL
and
#/NS
The procedure in order to change the position to the keys indicated over, so
numerical keys from 0 to 9, the multiplication key, "CL" key and the "#/NS" key, is following
1) To switch ON the ECR holding pressed the keys indicated in position 001, 002 and 003
of the figures indicated in:
9.1.1
G556E and G456E key position number table
9.1.2
G3000R key position number table in the previous page
2) After to have executed point 1), press for three times the key indicated in the position
1 on same figures indicated over, after this the ECR's display will visualize :
Alphanumeric Display
Numeric Display
OK?
---
3) Press at this point following keys :
You may press "Key on position 54" to set the keys in object like default in automatic mode
after the pressure of the key.The "obbligatory keys" will be set in the ECR'S keyboard like
from default, in the ECR'S display will appear "0" (zero) again and it will be possible to be
begun to operate, such default will remain until the power OFF of the ECR.
You can press "Key on position 52" in order to activate the function that allows to change
"the obbligatory" keys position.
4) If it has been pressed the key position 52 the display will visualize :
Alphanumeric Display Numeric Display
Tenkey
0
-0-
press the key where to set the zero
5)
Tenkey
1
-1-
press the key where to set the one
6)
Tenkey
2
-2-
press the key where to set the two
7)
Tenkey
3
-3-
press the key where to set the three
8)
Tenkey
4
-4-
press the key where to set the four
9)
Tenkey
5
-5-
press the key where to set the five