- 38 -
5.1.3 DMX channel assignment for Mode 4 with extended programming options
M4
Funktion
DMX
1
Pan
(X) movement 540.73°
000-255
2
Pan
(X) fine
000-255
3
Tilt
(Y) movement 237.78°
000-255
4
Tilt
(Y) fine
000-255
5
Control channel
To enable uniform dimming manually via faders for all light mixing conso-
les, 5 different settings for the DMX smoothing are available. If the DMX
signal is interrupted or too few packets are sent on some DMX consoles,
this channel can be used to adjust the response of the headlamp. The Mi-
nimum DMX Smoothing setting should work on most popular consoles.
The values for DMX smoothing must be permanently applied. For the other
values such as Cooling Mode, Color Temperature, Zoom Modes ....... the
values must be present for 2 seconds, then the device will be permanent-
ly switched over. The exception is the setting of the COOLING-MODE,
here it depends on the switch SAFE MODE SWITCH, if it is on OFF the
COOLING-MODES can be switched directly, if this is ON the DIMMER and
SHUTTER must get the DMX-value 0. Only then can be switched.
Setting for minimal DMX smoothing
(A dimmed shutter sequence is possible)
Dimmer fade out via fader (fast - slow)
Not used
Setting for minimum / medium DMX smoothing
Dimmer fade out via fader (fast - slow)
Not used
Setting for medium DMX smoothing
Dimmer fade out via fader (fast - slow)
Color Mix Power Limit - Sets the total power consumptio
50%
60%
70%
80%
90%
Off
Constant Color Mode - Adjust color fidelity
Off
20%
40%
60&
80%
Max
Constant Brightness Mode - setting for constant brightness
control
Off
20%
40%
60%
80%
Max
000-007
008-031
032-039
040-063
064-071
072-072
073-073
074-074
075-075
076-076
077-077
078-078
079-079
080-080
081-081
082-082
083-083
084-084
085-085
086-086
087-087
088-088
089-089
