- 13 -
Display illumination as function display
The display illumination remains switched on during the reset. After the reset, slowly flashing
display illumination indicates that there is no DMX signal.
Very fast flashing display illumination after the reset indicates that a new error was saved in the
“ERROR LIST”. This occurred during the reset or during operation. The error, e.g. PAN TIMEOUT
is also shown on the display. This error is now set to “read” automatically but remains in the
“ERROR LIST”.
Fast flashing display illumination indicates an error that is still in the “ERROR LIST” but that has
already been confirmed or confirmed automatically. The Sparx 12 only starts again without error
indications once the error has been deleted from the “ERROR LIST”.
If errors occur more frequently, please contact your dealer/distributor or the JB-Lighting service
department.
If the Sparx 12 receives a DMX signal, the display illumination goes out after 30 seconds.
DMX addressing
In the main menu, the DMX address can be set directly by pressing the up/down keys.
Display operation via rechargeable battery buffering
Pressing the left key below the display activates the spotlight's configuration rechargeable
battery operation; the spotlight can therefore be configured without a power connection. All
settings displayed in the menu can be configured, e.g. the DMX address can be set or the error
list can be read.
