- 19 -
COOLING MODE - Adjust the brightness and fan volume
In the menu item COOLING MODE the fan control and the brightness of the Sparx 12 can be
adjusted. The following setting options are available.
THEATRE WHISPER: Volume 29 dB(a). In this mode, the headlight runs with the same brightness
up to an ambient temperature of 45 °C; it is not necessary to increase the fan in this mode.
THEATRE SILENT: from 45° C ambient temperature, the headlight controls the fans a little bit
upwards and thus remains in the same brightness.
STANDARD: starting at approx. 45 °C ambient temperature, the fans will run high to cool the LED
accordingly. The brightness remains constant up to 60 °C ambient temperature.
BOOST: the fans run a bit more in this mode, from about 45 °C ambient temperature, the fans
regulate again accordingly high.
LONGLIFE: The fans run a bit more in this mode, from about 45 °C ambient temperature, the fans
regulate again accordingly high. We would prefer this mode for permanent installations, since the
LED module is operated cooler.
There is no danger to the life of the device as the Sparx 12 has a temperature safety shutdown.
In addition, the LEDs are switched off from an ambient temperature of 60 °C.
PAN TILT SPEED - Pan / Tilt speed setting
In the PAN TILT SPEED menu item you can set the maximum speed, the acceleration and thus
also the movement volume of the P12. The following setting options are available.
WHISPER: The speed of Pan / Tilt is reduced so much that a volume of 29dB (A) is not exceeded.
SILENT: The speed of Pan / Tilt is slightly faster and thus louder as compared to the Whisper
setting.
MEDIUM: The acceleration and deceleration ramps are set very soft so that the headlamp brakes
softly and starts.
FAST: The acceleration and deceleration ramps are set very hard so that the headlamp moves
very fast and directly at maximum speed.
EFFECT SPEED - Sets the effect speed
In the menu item EFFECT SPEED you can set the maximum speed, the effects and thus also the
volume of the effects of the Sparx 12. The following setting options are available.
WHISPER: The speed of the effects is reduced so much that a volume of 29dB (A) is not exceed-
ed.
SILENT: The speed of the effects is slightly faster and thus a bit louder than with the Whisper
setting.
MEDIUM: The acceleration and deceleration ramps of the effects are set very soft, so that the
effects are very soft and thus cause little noise.
FAST: The acceleration and deceleration ramp effects are set to maximum speed. Very fast gobo
and color changes are possible!
