AAA-055-00243 R1
Jaylor Dump Wagon Owner Manual
P a g e
|
27
21.
MAINTENANCE AND SERVICE INFORMATION
This section covers the maintenance required for your Jaylor dump wagon. It is essential that your
Jaylor receives this maintenance to retain the safety, dependability, and performance originally built
into your Jaylor product. By following a careful service and maintenance program for your machine,
you should enjoy many years of trouble-free service.
In some cases, the maintenance required for your Jaylor may necessitate the assistance of qualified
service personnel. Please consult with your dealer or distributor for assistance with such services.
Always keep this manual, and leave it with the machine when sold. The maintenance record, plus
maintenance receipts, may be needed for warranty repairs. It is suggested that receipts be kept with
this section. A convenient log for recording maintenance performed is provided at the end of the
maintenance section.
Always give your dealer/distributor the model number and serial number of your Jaylor dump wagon
when ordering parts or requesting service or other information. Refer to Section 6 for location of the
serial number. Depending on the type of service, the serial numbers of individual components and/or
assemblies will be required.
It is the owner/operator’s responsibility to operate, lubricate, maintain, and store the machine in
accordance with all instructions and safety procedures.
Remember, the guidelines established in this manual are general. All maintenance and service work
is
NOT
limited to these guidelines. If you have any questions or concerns, please contact your Jaylor
Dealer or Distributor.
Maintenance Safety
21.1
SAFETY FIRST:
1. Follow ALL the operating, maintenance and safety information in the manual.
2. Support the machine with blocks or safety stands when changing tires or working
beneath.
3. Follow good shop practices.
4. Use only tools, jacks and hoists of sufficient capacity for the job.
5. When parking dump wagon, place on a flat, level surface, block wheels and disconnect
from towing vehicle. Be sure to let engine and hydraulic system cool to a safe
temperature before servicing, adjusting or repairing any of these components.
6. Make sure all guards are in place and properly secured when maintenance work is
completed.
7. Before applying pressure to a hydraulic system, make sure all lines, fittings, and
couplers are tight and in good condition.
8. Keep hands, feet, hair, and clothing away from all moving and/or rotating parts.
9. Clear area of bystanders (especially small children), when carrying out any
maintenance, repairs, adjustments or testing.
