AAA-055-00243 R1
P a g e
|
22
Jaylor Dump Wagon Owner Manual
18.
STORAGE
Should the machine be stored for an extended period of time, it should be thoroughly inspected and
prepared for storage. Repair or replace any worn or damaged components to prevent any
unnecessary down time the next time the machine is to be used.
Recommended procedure:
1. Wash the entire machine thoroughly using a water hose or pressure washer to remove all dirt,
mud, debris, or residue.
2. Inspect all moving parts. Remove any debris, or other material that has become entangled in the
axles or hubs. Be sure the components are clean and move freely.
3. Inspect all hydraulic hoses, fittings, lines, and valves. Tighten any loose fittings. Replace any
hose that is cut, nicked, abraded, or separating from the crimped fitting.
4. Lubricate all grease points. Make sure all grease cavities have been filled with grease to remove
any water residue left from washing.
5. Apply grease to the exposed cylinder rams.
6. Touch up all paint nicks and scratches to prevent rusting.
7. Move the machine to its storage position.
Select an area that is dry, level, and free of debris.
8. Place planks under the jack for added support if required.
9. Unhook the machine from the towing vehicle.
10. Block the wheels on the machine.
11. Make sure the dump box is tipped slightly towards the tailgate and the tailgate is left ajar for
drainage of rain water and snow
