AAA-055-00243 R1
Jaylor Dump Wagon Owner Manual
P a g e
|
9
Stay away from overhead power lines when loading. Electrocution can occur without contact.
Clean reflectors, lights, SMV signs, before transporting.
Use hazard flashers on towing vehicle when transporting. Follow all local laws and regulations
when transporting the machine on public roads and highways.
Before applying pressure to the hydraulic system, make sure all components are tight and that
hoses and couplings are in good condition.
Review safety instructions with all personnel annually.
Maintenance and Repair Safety
8.6
Follow ALL the operating, maintenance, and safety information in the manual.
Only properly trained personnel should maintain and repair this equipment.
Support the machine with blocks or safety stands when changing tires or working beneath.
Follow good shop practices:
o
Keep service areas clean and dry.
o
Be sure electrical outlets and tools are properly grounded.
o
Use adequate lighting for the job at hand.
Use only tools, lifting equipment, and safety stands of sufficient capacity for the job.
Disconnect from towing vehicle and support the machine with blocks or safety stands before
servicing, adjusting or repairing.
Relieve pressure from the hydraulic circuit before servicing or disconnecting from the towing
vehicle.
Before applying pressure to a hydraulic system, make sure all lines, fittings, and couplers are
tight and in good condition.
Keep hands, feet, hair, and clothing away from all moving and/or rotating parts.
Clear the area of bystanders, especially children, when carrying out any maintenance and
repairs or making any adjustments.
Do not allow grease or oil to build up on the machine.
Hydraulic Safety
8.7
Make sure that all components in the hydraulic system are kept in good condition and are
clean.
Replace any worn, cut, abraded or flattened hoses or metal lines immediately.
