janitza UMG 801, Руководство пользователя

Страница: 70 / 106

UMG 801 www.janitza.de
70
Fig. Assistant for configuring the digital inputs in the GridVis
®
software.
12. Digital inputs and outputs
As described previously in the chapter „9. Periph-
erals“ on page 48, the device has 4 digital inputs
and 4 digital outputs each.
You can configure the digital inputs and outputs
easily and clearly in the GridVis
®
software.
The GridVis
®
software is available for download
from our website (www.janitza.de).
12.1 4 digital inputs
The digital inputs are used to send information
from other devices with a digital output to your
device (pulse counter).
In the “Peripherals" section of the "Configuration"
window in the GridVis
®
software, an assistant
guides you through the configuration of the 4 dig-
ital inputs with the following settings and functions:
INFORMATION
For detailed information on configuring the digital
inputs of your device, refer to the online help for
the GridVis
®
software.
1. Value Type selection list (of the incoming
signal, e.g. electrical energy, gas/water/oil con-
sumption, CO2, etc.)
2. Name of the user-defined value -
Depends on the value type. Optional name
entry for the value type "User-defined values".
3. Unit of user-defined value -
Depends on the value type. Optional entry of
the unit for the value type "User-defined values"
4. Scaling factor for the pulse/unit -
The unit depends on the configured value type.
If the value type "User-defined values" is set,
the pulse/unit selection list adopts the unit en-
tered under "Unit of user-defined value".