manualshive.com logo in svg

janitza UMG 801, Руководство пользователя, Страница: 28 / 106

Поделиться
Скачать
janitza UMG 801 Скачать руководство пользователя страница 28

UMG 801

www.janitza.de

28

5.  Mounting

5.1 

Installation location

DANGER

Danger of electric shock!

Electric shocks lead to serious injuries, including 

death.

 ·Disconnect your system from the power supply 

before mounting and connecting the device!

 ·Secure it against being switched on!

 ·Check to be sure it is de-energized!

 ·Ground and short circuit!

 ·Cover or block off adjacent live parts!

 ·The installation must only be carried out by 

qualified personnel with electrical training!

Mount the meter in switch cabinets or small 
distribution boards according to DIN 43880 on 
a 35 mm mounting rail (for type, see technical 
data) according to DIN EN 60715. The mounting 
orientation is arbitrary.

Fig.: Bus connector of the UMG 801 (scope of delivery)

Plug for insertion into the 
underside of the device

Sockets for the insertion 
of a module

5.2 

Mounting orientation and attachment

Proceed as follows to mount the UMG 801 on 
the mounting rail:

1.  Check the installation of the bus connector 

(included in delivery, pre-assembled) on the 
bottom of your device. If not already done, 
plug the bus connector into the sockets on the 
bottom of the meter (see figures).

ATTENTION

Material damage due to improper handling or 

disregard of the assembly instructions!

Incorrect mounting of the UMG 801 can destroy the 

contacts of the bus connector (JanBus interface)!

 ·Use suitable mounting rails according to DIN 

EN 60715 for mounting the meter! For suitable 

mounting rail types, see the chapter 

„19. 

Technical data“ on page 96.

 ·

Before you begin mounting and wiring your 

UMG 801 on the mounting rail, plug the bus 

connector into the sockets on the bottom of 

the device if this has not yet been done! 

 ·

Caution:

 

-

Never touch or manipulate the contacts of 

the bus connector!

 

-

Never force the contacts into the bus 

connector sockets!

2.  Push in the floor bolt of the clamping mechanism.

pr

ess

Fig. Device and bus connector underside

Fig. Device underside with bus connector installed

Fig. Underside of device with bus connector installed and floor 

bolt pressed in.

INFORMATION

When the device is delivered, the bus connectors 

are already plugged into the JanBus interface!

Содержание UMG 801











































































































Отзывы:

Нет отзывов