janitza UMG 801, Руководство пользователя

Страница: 61 / 106

www.janitza.de UMG 801
61
Fig. Ethernet (TCP/IP) window
IP Config.
IP Address
Netmask
Gateway
DHCP
192. 168. 3. 177
192. 168. 3. 4
255. 255. 255. 0
Ethernet (TCP/IP)
ESC
 
11.2.1 Communication settings
The device has 2 types of address assignment for
an Ethernet connection (TCP/IP):
1.
Static (fixed IP address)
The user selects the IP address, netmask and
gateway on the device. Use this mode for
simple networks with no DHCP server.
2.
DHCP
The device automatically receives the IP
address, netmask and gateway from the DHCP
server at startup.
The default setting of the device is DHCP!
Configure your Ethernet (TCP/IP) settings via the
function buttons (see chap. 10.2 on page 56) as
follows:
·Select the item IP configuration (type of address
assignment) and press button 3 Enter .
·The item DHCP (default setting) blinks “yellow."
·If necessary, switch between the types of
address assignment using buttons 2 (
5
) and 5
(

).
·Confirm your selection by pressing button 3
Enter .
·Go to the item IP Address (button 2 “
5
” and 5
“

”) and press button 3 Enter .
·The IP address entry blinks “yellow."
·Use buttons 4 (

) and 6 (

) to change the
position of the digit to be set and buttons 2 (
5
)
and 5 (

) to change the digit (-1/+1).
Tip! Start by setting the right digit of each block
of three.
·Finally, confirm your entry for the IP address with
button 3 Enter .
·The configuration of the Netmask and the Gate-
way require the same procedure.
·When you have finished entering data, press but-
ton 1 ESC to return to the Menu window.
11.2.2 Communication via OPC UA
OPC UA is the standard for platform-independent
data exchange. Data exchange using the OPC UA
protocol takes place via the Ethernet interfaces of
your device.
The Ethernet interface and data exchange
using the OPC UA protocol can be conveniently
configured in the GridVis
®
software.
INFORMATION
·Consult your network administrator for the
correct Ethernet network settings for your
device.
·Information on the connection and
communication of your device with the software
can be found in the online help for the GridVis
®
software.