8
9. Bolt on light bars (JM0036071) using (2) 1/2” x 2-1/4” bolts and (2) 1/2” centerlock hex nut. Use the outside
holes in the frame when mounting the light bars.
10. Secure rear lights onto the light bars (JM0036071) with (4) 1/4” x 1” bolts and (4) 1/4” serrated flange nuts for
each light. Red lights face out from the applicator and are located closer to the inside of the applicator while
yellow lights are located closer to the outside.
11. Guide the rear light harness through the conduit on the inside of the rear applicator frame. Guide the end of
wire harness that is labeled “Left” through the conduit towards the left (driver’s side) light bar. Push the end of
the harness that is labeled “Right” through the light bar on the right (passenger’s) side.
12. Prep the front hydraulic hose guard (JM0034836) by attaching the pressure gauge (JM0037152) with 1/4” Male
NPT x 1/4” Female NPT Rigid; 45 Degree Elbow (JM0037156) and 1/4” Female NPT x 3/8” Male JIC Compression
Bulk Head Fitting (JM0037155).
Frame
