34
1. Slide on main coulter body (JM0031265) with rotation lock collar inside. The square headed bolt in the
rotation lock collar sits in the drilled depression (as shown below). Insert a roll pin into the bottom hole of the
coulter rod to hold the coulter on the rod.
2. Mount coulter wheels using (4) 1/2”-13 x 2” studs, (4) 1/2” lock washers, (4) 1/2”-13 hex nuts, and dust cap
keeper (JM0038391) on each coulter.
3. After mounting the coulters (JM0031269), install the knife mounts (JM0059364) onto the coulter arm. Secure
each knife mount with (2) 1/2”-13 x 1-3/4” hex bolts, (2) 1/2” lock washers, (2) 1/2” flat washers, and (2) 1/2”-13
hex nuts.
Depression
for square
head bolt
Roll pin
goes here
Rotation
lock collar
Knife
mount
Coulter
Coulter and Wheel Finishing
