Jakobsen SJ24, Руководство по эксплуатации

Страница: 19 / 24

SJ 24
13
LUBRICATION
The saddle- and table ways are power lubricated by mean_s of
two lubrication pumps energized by the hydraulic system.
The circuits for the lubricant and the hydraulic oil are
separate.
The function is checked at the control glass (K)
1
see page
16
1
on top of the saddle
1
and impulse should appear at every
table reversal.
Moving parts which are not to be lubricated according to the
lubrication chal't
1
page 16 al'e l'Wlning in permanently gNased
sealed bearings. They sho�d be lubl'icated only when fal'ts are
disassembled fol' overhaul. This includes the wheel spindle.
ELECTROMAGNETIC CHUCK
The chuck is connected to the Elec­
tro-Magnetic Rectifier (optional
equipment) which again is connected
in the control cabinet at the left
hand side of the machine column.
• •
The chuck is "switched on" by tum ...
ing push button B' to the right and
is demagnetized oy "switching off"
the chuck (push button " B to the
left) and a short press on button "D".
When "switching on" the chuck
1
the
green control lamp "L" will be alieht.
STOP
0
., "