Jakobsen SJ24, Руководство по эксплуатации

Страница: 21 / 24

SJ
24
15
HYDRAULIC WHEEL DRESSING ATTACHMENT
The over-the-wheel dresser (optional equipment) is mounted on
the top of the wheel guard and permits dressing of wheel with­
out removing the work from the chuck. This device is very use­
ful on production grinding applications.
53
51
"
--
.{.
·. r '7 •.
"=�=;?·
HOW TO USE THE "OVER-THE-WHEEL" DRESSER
Turn table speed lever (24) to blue mark position
54
Feed the diamond across the wheel face by turning the lever
(51) to the right.
The diamond is fed down vertically by means of the knob (52)
calibrated in 0,05 mm (.002
11
)
increments and the speed by which
the diamond is fed across the wheel face is adjusted by means
of the knob (53). The diamond can be rotated or removed by loo­
sening the set screw (54) shown above.
As to lubrication of the wheel dresser, see lubrication chart
page 16.
By irregular movement of the dresser, clear the cylinder of
air by setting the knob(53) at max. speed and let the piston
bottom 5-6 times in inner and outer position.