Jakobsen SJ24, Руководство по эксплуатации

Страница: 11 / 24

SJ 24 7
THE MANUAL TABLE TRAVEL
If manual table travel is desired, the table speed control
lever (2 4) must be turned anti-clockwise to the blue mark position,
and the table reversine lever (23) in left position.
Now turn the inner handwheel (33) clockwise until the blue mark
position, whereafter the table is ready for manual operation
by means of the manual handwhee 1 (_ 34) •
REMEMBER TO TURN THE INNER HANDHHEEL ( 33) OUT OF ENGAGEMENT
(FULLY ANTICLOCKWISE) AGAIN BEFORE THE HYDRAULIC MOVEMENT
IS STARTED AGAIN.
THE CROSS MOVEMENT
�--
-
�_-
-�
'?�I
L_ �
J
Q_0_�-7
21.
Hydraulic intermittent cross feed.
�
I , , . ,
; /
23
-=---i.
Set the crossfeed trit does (35) for the desired total saddle
travel. Ensure that t e cross feed reversing lever (36) is
between the trip docs.
Now turn the cross feed control lever (25) in left position and
turn table speed control lever (24) clockwise.
The crossfeed is infinitely variable from 2 - 40 nm (.08" - 1.6")
by means of the cross feed increment adjusting control ( 32).