User Manual (Ver. 1.0) - Main Functions
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 43 -
Select the trigger type with TriggerSelector, and set the following items for each trigger.
TriggerMode
Switch enable or disable.
TriggerSource
Select the source signal (PulseGenerator0-3, UserOutput0-3, Action0-3, Software, Line5
Opt In, Nand0 Out, Nand1 Out).
Note:
Trigger can be executed by TriggerSoftware[TriggerSelector] command only
when Software is set.
TriggerActivation Sets the polarity of the trigger signal.
TriggerDelay
You can specify a delay after receiving the trigger signal until the trigger is enabled.
Note:
This trigger type is available only when TriggerSelector is set to
FrameStart
.
When Using the FrameStart Trigger
When AcquisitionStart is executed and a FrameStart trigger is received before the AcquisitionStop
command is executed, one frame is acquired.
The source signals that can be set for the AcquisitionStart, AcquisitionEnd, FrameStart, and
AcquisitionTransferStart triggers are as follows:
l
Software, PulseGenerator 0 – 3, UserOutput 0 – 3, Action 0 – 3, Line5 Opt In 1, NAND0 Out, and
NAND1 Out.