User Manual (Ver. 1.0) - Setting List
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 115 -
DeviceControl Item
Setting Range
Default
Value
Description
DeviceTLVersionMajor
2 (Fixed)
-
Indicates the major version number of the device's Transport Layer.
DeviceTLVersionMinor
0 (Fixed)
-
Indicates the minor version number of the device's Transport Layer.
DeviceTLVersionSubMinor
1 (Fixed)
-
Indicates the sub-minor version number of the device's Transport
Layer.
DeviceLinkSelector
0 (Fixed)
0
Select Link.
DeviceLinkSpeed
-
125000000
Bps
Displays the negotiated transmission rate.
DeviceLinkHeartbeatMode
0:Off
1:On
1:On
Enable/Disable Heartbeat mode.
DeviceLinkHeartbeatTimeout
500000
~
120000000
3000000
Configure the timeout value for Heartbeat (unit: μs). Step: 1000
DeviceStreamChannelCount
1 (Fixed)
-
Display the number of supported stream channels.
DeviceEventChannelCount
1 (Fixed)
-
Display the number of supported message channels.
DeviceCharacterSet
1: UTF8 (Fixed)
-
Display the character encoding.
DeviceReset
-
-
Reset the device.(After the camera receives this command, it returns
an ACK response and executes the reset.)
DeviceRegistersEndianness
1:big-endian
(Fixed)
-
Display the register's endianness.
DeviceTemperatureSelector
0: Mainboard
1: Sensor
2: FPGA
0: Mainboard
Select the area of the camera's interior for which to display the
temperature sensor's reading.
DeviceTemperature
-55
~
125
0
Display the internal temperature (°C) of the device specified by
DeviceTemperatureSelector.
Timestamp
0
~
64bit max 0
Display the timestamp value (ns). Resets to 0 when the signed
maximum 64-bit value is exceeded.
TimestampReset
-
-
Forcibly sets the timestamp's count value to 0.
TimestampLatch
-
-
Sets the timestamp's count value to TimestampLatchValue.
TimestampLatchValue
0
~
64bit max 0
Maximum value Signed 64-bit max value.
UserDefinedValueSelector
0: Value1
1: Value2
2: Value3
3: Value4
4: Value5
0: Value1
Five 32bit data can be set and saved.
UserDefinedValue
-2147483648
~
2147483647
0
Selects one of the 32bit data (Value1 to Value5) set in
UserDefinedValueSelector, and reads and sets the value in
UserDefinedValue.