User Manual (Ver. 1.0) - Setting List
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 117 -
TransportLayerControl Item
Setting
Range
Default Value
Description
GevCurrentDefaultGateway
-
-
Display the default gateway.
GevIPConfigurationStatus
-
2:DHCP
Display the current IP configuration status.
Setting Range
:
0:None , 1:PersistentIP, 2:DHCP, 3:LLA, 4:ForceIP
GevPersistentIPAddress
-
192.168.0.100 Set the persistent IP address.
GevPersistentSubnetMask
-
255.255.255.0 Set the persistent subnet mask.
GevPersistentDefaultGateway
-
0.0.0.0
Set the persistent default gateway.
NetworkThroughput
SafetyMargin
10 - 100
92
For the configured LinkSpeed, set the limit to the bandwidth
of the stream out of the camera (%).
Caution:
You can increase the frame rate by increasing this
value. However, when set to more than 92 (default), abnormal
images may be observed depending on the PC and its
environment. If this happens, set the value to the default value
(92).
GevIEEE1588
Related Topic:
0: False
1: True
0: FALSE
TRUE : Enables PTP
FALSE: Disables PTP
GevIEEE1588ClockAccuracy
0 -20
19:Unknown
Indicates clock accuracy.
Setting Range
:
0:Within25ns, 1:Within100ns, 2:Within250ns, 3:Within1us,
4:Within2p5u, 5:Within10us, 6:Within25us, 7:Within100us,
8:Within250us, 9:Within1ms. 10:Within2p5ms, 11:Within10ms,
12:Within25ms, 13:Within100ms, 14:Within250ms, 15:Within1s,
16:Within10s, 17:GreaterThan10s, 18:AlternatePTPProfile,
19:Unknown, 20:Reserved
GevIEEE1588Status
-
-
Display the IEEE 1588 Status.
1:initializing, 2:faulty, 3:disabled, 4:listening, 5:preMaster,
6:master, 7:passive, 8:uncalibrated, 9:slave
GevGVCPExtendedStatus
CodesSelector
0:Version1_1
1:Version2_0
0:Version1_1
Select the GevGVCPExtendedStatusCodes.
GevGVCPExtended
StatusCodes
-
-
Enables the generation of extended status codes.
GevGVCPPendingAck
Step 6: Adjust the Image Quality
0: Off
1: On
0: Off
Enables/disables the PENDING_ACK.
GevGVSPExtendedIDMode
0: Off
1: On
0: Off
Enables/disables Extended ID Mode.