User Manual (Ver. 1.0) - Setting List
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 142 -
BlemishControl
Configure settings for JAI white blemish correction.
Related Topic:
Blemish Control Item
Setting
Range
Default
Value
Description
BlemishEnable
-
1: Enable
Enable/disable blemish correction.
0: Disable all
1: Enable
2 :Disable user detection
BlemishDetect
-
-
Execute blemish detection. This command cannot be executed under the
following conditions.
- No image is being output.
- TestPattern is being output
- In Sequencer Mode (
)
- In MultiRoi mode (
- The image is not full ROI size (
- In Reverse mode (
)
- GradationCompressionMode is not Off (
- AcqusitionMode is not Continuous (
- Not in lens cap state
BlemishDetectionResult
-
0
Display the blemish detection results.
0: Idle
1: Succeeded
2: Error1 - image was too bright
3: Error2 - image was too dark (unused)
4: Error3 - signal level was unbalanced (unused)
5: Error4 - detect blemishes too many
6: Error5 - could not detected
7: Error6 - timeout
BlemishDetectThreshold
1
~
99
10
Set the blemish detection threshold.
BlemishStore
-
-
Save the location information of detected blemishes, manually specified by
BlemishiCompensationPositionX and BlemishCompensasionPositionY.
BlemishCompensationIndex
1
~
2000
1
Select the index for the target blemish coordinates.
BlemishCompensation
PositionX
-
-1
Display the X coordinate (horizontal pixel position) of the target blemish
selected in BlemishCompensationIndex. You can also manually enter the X
coordinate of the blemish you want to correct.
Min
: -1
Max
: WidthMax - 1