User Manual (Ver. 1.0) - Main Functions
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 97 -
ROI Function (Multi ROI)
Related Setting Items:
Notes:
l
Refer to
Functions That Cannot Be Used Together
for usage restrictions.
l
If this function is turned on while
is set to On, Shading Correction will be
forced to Off.
In Multi ROI mode, you can specify up to 64 scanning areas for a single-frame image. By skipping
areas that are not specified as regions of interest when scanning a frame, the ROI function outputs the
specified regions in a combined state. You can increase the frame rate due to the reduced scanning
time for the combined areas. However, you cannot increase the frame rate by compressing in the
horizontal direction.
How to Configure
1. Set
MultiRoiMode (MultiROIControl)
to
On
.
2. Select from the eight indexes in MultiRoiIndex then set
MultiRoiWidth
,
MultiRoiHeight,
MultiRoiOffsetX
, and
MultiRoiOffsetY
.
3. Set the maximum index number to be enabled to
MultiRoiVerticalEnableNumber
and
MultiRoiHorizontalEnableNumber
.