Jacobsen Truckster XD, Руководство по эксплуатации и техническому обслуживанию

Страница: 73 / 76

PROBLEM SOLVING 11
en-72
11Problem Solving
11.1 GENERAL ________________________________________________________________
The problem solution chart lists basic problems that can occur during start and operation of the vehicle. For complete
information about the hydraulic and electrical systems, contact your Jacobsen Dealer.
Symptoms Possible Causes Action
Engine will not
start. 1. Clutch pedal not pressed. 1. Check Interlock System and start-up procedure.
2. Glow plug has not timed
out. (Diesel Engine Option) 2. Reset ignition switch and allow glow plug to time out
before cranking engine.
3. Battery low on charge or
defective. 3. Inspect condition of battery and battery connections.
4. Fuel tank empty or dirty. 4. Fill with fresh fuel. Change fuel filter. Bleed fuel lines.
5. Fuse blown. 5. Replace fuse.
6. Relay(s) defective. 6. Test and replace relay.
Engine hard to
start or runs
poorly. 1. Fuel level low, fuel or fuel
filter dirty. 1. Fill with fresh fuel. Change fuel filter. Bleed fuel lines.
2. Air cleaner dirty. 2. Inspect and replace air filter.
3. Injectors, fuel pump. 3. Consult engine manual.
4. Engine problem. 4. Consult engine manual.
Engine stops. 1. Fuel tank empty. 1. Fill with fresh fuel and bleed fuel lines.
Engine
overheating. 1. Coolant level low. 1. Inspect and add coolant.
2. Air intake restricted. 2. Clean air intake at radiator.
3. Water pump belt broken or
loose. 3. Tighten or replace belt. See engine manual.
Battery not
holding charge.
Battery light on.
1. Loose or corroded battery
terminals. 1. Inspect and clean terminals.
2. Low electrolyte. 2. Refill to correct level.
3. Alternator belt loose or
broken. 3. Tighten or replace belt. See engine manual.
4. Charging system defective. 4. See engine manual.