Jacobsen Truckster XD, Руководство по эксплуатации и техническому обслуживанию

Страница: 45 / 76

OPERATION 7
en-44
7.6 TO DRIVE THE VEHICLE ____________________________________________________
Read and follow all safety instructions contained in this manual when you drive the vehicle. When you operate in the
reverse direction, look behind you to make sure you have a clear path.
IMPORTANT: Equipment must meet the current regulations to be driven on the public roads.
To drive the vehicle:
1. If the high/low hydraulic system is installed, put the high/low hydraulic system switch
in the OFF position to stop the flow of fluid to the hydraulic accessory connectors.
2. Completely lower the vehicle bed before you drive the vehicle.
3. Press the brake pedal and disengage the parking brake.
4. Fully depress the clutch pedal.
5. The gear selector knob has the gear pattern marked in the top surface. Select 1st or
Reverse gear, slowly release the clutch pedal while you press the accelerator pedal.
When you drive in the forward direction, always start in 1st gear and shift into the
higher gears as the vehicle speed increases.
Do not drive more the 5 to 6 mph (8 to 10 kph) or drive long distances in the reverse direction.
6. When the vehicle has enough speed, release the accelerator pedal while you press the clutch pedal. Change the
transmission to the next higher gear and release the clutch pedal while you press the accelerator pedal. When
the clutch pedal is pressed, do not press the accelerator pedal.
7. Continue to change the gears until the vehicle moves at the correct speed. See Section 7.7 for the correct gear
and engine speed to get the necessary vehicle speed.
8. When the you decrease the vehicle speed, you can change the transmission to a lower gear. Release the
accelerator pedal while you press the clutch pedal and change the transmission to the next-lower gear. If the
gear selector does not easily change to a lower gear, continue to decrease the vehicle speed before you change
gears.
DO NOT force the gear selector into a lower gear. When the vehicle speed is too high and you change to
a lower gear, damage to the transmission can occur.
NOTICE
The vehicle will start to move before the clutch pedal is completely released. When the vehicle starts to move, press
the accelerator pedal more and release the clutch pedal. To prevent damage to the clutch, do not drive the vehicle
with the clutch pedal not completely released.
1 3 5
2 4 R