Jacobsen Truckster XD, Руководство по эксплуатации и техническому обслуживанию

Страница: 3 / 76

INTRODUCTION 2
en-2
2Introduction
2.1 IMPORTANT ______________________________________________________________
The Jacobsen Truckster XD with a Kubota Gasoline or Diesel engine is a self propelled vehicle. The hydraulic systems
are for the steering, bed lift and optional remote hydraulics.
If you follow all instructions in this manual, you increase the life of your vehicle and keep its maximum performance.
Adjustments and maintenance must always be done by an approved technician.
IMPORTANT: Do the maintenance included in this manual to make sure that the vehicle operates correctly.
This SAFETY, OPERATION AND MAINTENANCE MANUAL is part of the vehicle and must stay with the vehicle
always. Suppliers of both original and used vehicles need to keep the documentation that comes with the vehicle.
Compliance with the conditions or operation, service and repair specified by the manufacturer, are understood to be
part of the correct use.
ALL operators MUST read through this manual and understand the Safety Instructions, controls, lubrication and
maintenance procedures.
Make sure that you obey all safety and road traffic regulations.
You must not make any changes to the vehicle that the manufacturer does not approve. This type of change can
release the manufacturer from the liability for any damage or injury.
Only if the vehicle manufacturer is no longer in business and there is no successor to the business can you make
changes to the vehicle, provided that:
• An engineer in the industrial truck industry, who knows the safety requirements, must design, test and install the
changes to the vehicle.
• You must keep a permanent record of the design, tests and installation of the changes.
• You must approve and make applicable changes to the vehicle capacity plate, decals, tags and manuals.
• You must apply a permanent and visible label to the vehicle. The label must provide a description of the changes,
when the changes were made and the name and address of the company that designed, tested and made the
changes.
When you discard worn parts, know the environmental result and use the systems available in the country where the
vehicle is used. When the vehicle is at its end of life, there are guidelines in this manual for the removal of the vehicle
from use.
Use only Jacobsen approved parts.
2006/42/EC

The instructions recorded here are the original instructions confirmed by Jacobsen, A Textron Company.