Jacobsen Truckster XD, Руководство по эксплуатации и техническому обслуживанию

Страница: 55 / 76

MAINTENANCE 9
en-54
9.3 ENGINE __________________________________________________________________
IMPORTANT - The vehicle includes a separate Engine Manual prepared by the engine manufacturer. Read the Engine
Manual and know the operation and maintenance of the engine. When you follow the engine manufacturer instructions,
you will make sure of the maximum service life of the engine. The replacement engine manuals are available from the
engine manufacturer.
The operation and maintenance during the first 50 hours of a new engine can make a difference to the performance
and life of the engine.
During the first 50 hours of operation, Jacobsen recommends the following.
• Allow the engine to reach a temperature of at least 140° F (60° C) before operation at full load.
• Check the engine oil level two times each day. Higher than normal oil use can occur during the first 50 hours.
• Change the engine oil and oil filter after the first 50 hours of operation.
• Check the fan belt.
• Refer to the Engine manual for specified maintenance intervals.
If the injection pump, injectors or the fuel system need service, contact your Jacobsen Dealer.
9.4 ENGINE OIL ______________________________________________________________
Check the engine oil level each day before you start the engine
or at least five minutes after you stop the engine.
a Park the vehicle on a level surface.
b Remove the dipstick, clean the dipstick with a cloth and
replace in position.
c Remove the dipstick and check the oil level. The oil level
must be between the two level indicators on the dipstick.
NOTICE
The vehicle operates correctly at the preset governor setting. Do not change the engine governor setting or over
speed the engine.
Level
Indicators
Dipstick
Diesel
Engine
Gasoline
Engine