Jacobsen 10029194, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 108 / 148

B
en-108
Safety, Operation, & Maintenance Manual
LDU ERROR CODES
Lithium
Throttle Sensor Error. Shut mower off,
then restart, making certain traction
pedal is in neutral. If fault returns,
mower must be towed back to mainte -
nance shed.
    
    
BRC Timeout / BRC On Failure / BRC
Off Failure:
BRC failure. Shut mower off, then
restart. If fault returns, mower must be
towed back to maintenance shed.
    
Start Up Procedure Failed. Shut
mower off, then restart. If fault
returns, mower must be towed back
to maintenance shed.
    
Brake sensor error. Shut mower off,
then restart. If fault returns, mower
must be towed back to maintenance
shed.
    
Dynamic Reference Ratio Error:
This indicates that a dynamic refer -
ence ratio below the allowable level
has been detected.
Signal 1 Gain Out of Range:
The adapted gain is too low or too
high.
Signal 2 Gain Out of Range:
The adapted gain is too low or too
high.
Signal 1 Offset Out of Range:
The adapted offset is too high or too
low/
LDU Error Code Description
Caution
LED
Alarm
Sound -
ing
Engine
Stop
Traction
Stop
Mow Stop
On Off Yes No Yes No Yes No Yes No
TRACTION
FAULT 6211
STEERING
FAULT 6211
TRACTION
FAULT 6212
TRACTION
FAULT 6213
TRACTION
FAULT 6214
STEERING
FAULT 6300
STEERING
FAULT 7210
3WD TRACTION
FAULT 7210
STEERING
FAULT 7211
3WD TRACTION
FAULT 7211
STEERING
FAULT 7212
3WD TRACTION
FAULT 7212