Jacobsen 10029194, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 113 / 148

B
LDU ERROR CODES
en-113 Safety, Operation, & Maintenance Manual
Lithium
Tool High Zero Speed Slip:
The slip speed is too high compared
to the expected slip speed at zero
sensor speed. The typical cause of
this error is that the sensor is
mechanically separated from the
motor.
AC Current Control Error:
The system has detected that the
expected AC current and the mea -
sured AC current is too high. This
indicates a faulty current measure -
ment sensor or poorly tuned current
controller.
AC Current Meas Plausibility Error:
The reference AC voltage is higher
than what the measured AC current
indicates. This indicates that one or
more motor phase cables are not con -
nected properly or that there is a
faulty current measurement sensor.
Frequency Above 599 Hz:
The electric frequency is evaluated to
be above 599Hz.
Controller has not received an
expected CANopen message within
the time out time. Shut mower off,
then restart. If fault returns, mower
must be towed back to maintenance
shed.
    
    
    
LDU Error Code Description
Caution
LED
Alarm
Sound -
ing
Engine
Stop
Traction
Stop
Mow Stop
On Off Yes No Yes No Yes No Yes No
TRACTION
FAULT 8071
TRACTION
FAULT 8090
STEERING
FAULT 8090
3WD TRACTION
FAULT 8090
TRACTION
FAULT 80A0
STEERING
FAULT 80A0
3WD TRACTION
FAULT 80A0
TRACTION
FAULT 80B0
STEERING
FAULT 80B0
3WD TRACTION
FAULT 80B0
TRACTION
FAULT 8100
STEERING
FAULT 8100
3WD TRACTION
FAULT 8100