Jackle ProPuls 320 Compact, Руководство по эксплуатации

Страница: 38 / 76

ProPuls 320C
Operating manual Page 34
13. Brief description
Based on the latest, digitally-controlled IGBT inverter technology, this compact, synergic, multi-function machine
makes it possible to perform high-quality welding, in MIG/MAG and in MIG pulsed, on all materials and
particularly on stainless steel and aluminium, by minimizing any reworking job after welding thanks to its spatter
free performance.
On the technological cutting edge, sturdy, easily transported, and simple to use, Pro Puls represents the ideal
solution for any application requiring high precision and repeatability of the achieved results, by making this
power source particularly suitable for the most qualified jobs in any industrial application. The high versatility of
Pro Puls
also achieves optimal performances both in TIG by "lift" mode striking and in MMA welding.
The main feature of the welding units are:
• Innovative and user friendly design;
• Metal bearing structure with front panel in special anti-shock material;
• Robust handles built into the chassis;
• Control panel protected against accidental impact;
• Synergic digital control of all the welding parameters;
• Spatter free exceptional welding characteristics in both MIG/MAG, MIG Pulsed and MIG Dual Pulsed on any
material and with any gas;
• High welding performance in both MMA and TIG by "lift" mode striking;
• Exclusive SWS "Smart Welding Stop" system at the end of TIG welding. Lifting up the torch without switching
off the arc will introduce a slope down and it will switch off automatically;
• Ability to store personalized welding programs;
• Monitoring and repetition of welding parameters;
• User friendly and easy-to-use selection and recalling of the parameters and welding programs;
• Low energy consumption;
• "Energy Saving" function to operate the power source cooling fan and the torch water cooling only when
necessary;
• Auto-diagnostic feature for trouble shooting;
• Initial and crater welding cycle control;
• With the special MIG torches you can adjust the welding parameters at a distance straight from the torch.
• Cast aluminium wire feeder with 4 large size rolls for precise and constant wire feeding;
• Welding current SYNERGIC adjustment;
• Arc length FINE adjustment;
• Wire test;
• Gas test.
MIG/MAG-pulse:
Spatter less pulse arc welding on all current materials and shielding
MIG/MAG-double gases with max. 20% CO
2
. A special ignition of the arc and the fast
Pulse reaction to short - circuits in case of unavoidable small problems of the
wire or the jig guarantees the highest process stability. The Hybrid is well suited for all
present solid and flux cored wires.
MIG/MAG-normal:
Low spatter for short, normal and spray arc welding with solid wire (GMA) and flux cored
wire. Highest process stability, especially at the lower current range for all shielding
gases from 100% CO
2
to 100% Argon.
Stick electrode: Optimal characteristics with high precise direct current for all types (MMA) of electrodes
from acid to basic. Integrated hot-start and arc-force function for best welding results for
all jobs. Large capacity for special electrodes with more than 100 % deposition rate.
MIG-brazing: Optimize welding curves for Cu-brazing with low bring in of temperature.