Jabiru Aircraft
Pty Ptd
Aircraft Service Manual
Jabiru J160 / J170 Variants
REVISION
0
Dated : May 2006
Issued By: RAS
Page: 164 of 171
L:\files\Technical_manuals\J230_J430\J230.J430_Work_files\J230-C_Tech_Rev_1.doc
Print Date: 14/01/2009 4:41:00 PM
21
APPENDIX IV – PROPELLER SERVICE MANUAL
21.1 APPROVED INSTALLATIONS
The following combinations are approved.
Table 18. Approved Propeller Installations
Airframe
Engine
Propeller
Dia x Pitch
Remarks/Limits
Jabiru J230-C
Jabiru 3300
C000262
1524 x 1346
(60” x 53”)
Not above 3300 RPM
21.2 IDENTIFICATION STAMPINGS
Each propeller is marked with the particulars indicated below:
1.
The Propeller Drawing No.
2.
The diameter and pitches in metres, proceeded by the letters "D" and "P"
respectively.
3.
The type of engine for which the propeller has been designed.
4.
Manufacturing Serial No.
21.3 DESCRIPTION
The Propellers are constructed from 4 laminations of approved species timber and are
manufactured in accordance with the relevant approved Drawing. They are single piece 2
blade propellers with an inlaid leading edge (urethane).
The propeller finish is a composite sheath, and clear epoxy paint (JABIRU Part No.
PP0039N).
WARNING
ENSURE IGNITION SYSTEM IS "OFF" BEFORE COMMENCING ANY WORK ON
PROPELLER.
DWG
D 1524 P 1346
JABIRU 3300
J J 6 0001 L C
Jabiru
Prop.
Jabiru
Engine
4 Stroke
Serial No.
Leading Edge
Protection
Composite
Sheath
