Jabiru Aircraft
Pty Ptd
Aircraft Service Manual
Jabiru J230-C
REVISION
0
Dated : Feb 2006
Issued By: RAS
Page: 144 of 171
L:\files\Technical_manuals\J230_J430\J230.J430_Work_files\J230-C_Tech_Rev_1.doc
Print Date: 14/01/2009 4:41:00 PM
3.
Remove Instrument Panel (see Paragraph 13.2.3) and check cable terminals for
security.
4.
Check wiring (see Wiring Diagram Figure 59).
5.
Check correct installation of magnetic sensor on engine (Refer to engine Instruction
& Maintenance Manual)
Should the instrument give incorrect readings:
1.
Check 10amp instrument fuse and replace if necessary.
2.
Check 15amp main circuit breaker and re-set if necessary.
3.
Check correct installation of magnetic sensor on engine (Refer to engine Instruction
& Maintenance Manual)
4.
Refer to an Authorised Service Centre to have Alternator and Regulator checked.
5.
Refer instrument to VDO Service Centre or JABIRU AIRCRAFT Pty Ltd for
inspection and possible repair.
13.5 OIL PRESSURE GAUGE
The Oil Pressure Gauge is an electronic instrument. Should the instrument fail to operate:
1.
Check 10amp instrument fuse and replace if necessary.
2.
Check 15amp main circuit breaker and re-set if necessary.
3.
Remove Instrument Panel (see Paragraph 13.2.3) and check cable terminals for
security.
4.
Check wiring at Sender for security.
5.
Replace Sender.
6.
Replace Gauge.
13.6 OIL TEMPERATURE GAUGE
The Oil Temperature Gauge is an electronic instrument. Should the instrument fail to
operate:
1.
Check 10amp instrument fuse and replace if necessary.
2.
Check 15amp main circuit breaker and re-set if necessary.
3.
Remove Instrument Panel (see Paragraph 13.2.3) and check cable terminals for
security.
