IXSEA TT801, Руководство пользователя

Страница: 56 / 94

Remote Control System TT801 – User Guide
MU-TT801-AN rev.6 September 2009 48
III.6 Activating the Release
This menu allows a quick access to the various pre programmed release commands
stored in the TT801 library (Configuration Data Base).
To proceed with this menu, press 2 key in the main menu and in turn the following window
opens with the selection of the first Release command available in the instrument’s
library (DATABASE) of the TT801:
RELEASE
IDENT : 352
TYPE : RT8xx
CODE ARM : 04C1 CMD : 0455
MONO : 12 kHz DISTANCE
COMMAND : RELEASE
SCROLL = CHOICE
ENTER = VALID
Step Action
1.
Select the new device to be loaded with SCROLL key.
TT801 displays the main parameters of the instruments selected.
To correct the ID, use the CLEAR key:
A blank window opens with requirement for an ID number.
You must then type in an existing saved ID number and confirm by pressing the ENTER
key to display the configuration of the selected instrument. If the selection is not valid,
the message “ ID NOT REGISTRED ” or “ NO RELEASE COMMAND ” is prompted and
you are required to exit ( HOME key) or to type in a new ID number.
Then, press ENTER key to confirm the selection.
TT801 skips to step 2.
2.
The window proposes to accept (transmit) or either to cancel the selection:
•
Press ENTER key to transmit the acoustic code(s).
•
Press CLEAR key to cancel the selection. TT801 clears the display and skips to step
1 of this procedure, asking for a new ID number.
3.
End of procedure.
Note
If you type in an ID number that has been used to save several configurations, the first
configuration registered with this ID number will be loaded.
Procedure