Operating Instructions
Page 9/60
The CCM-S is designed for operation at a point-to-point IO-Link communication interface according to the
international standard IEC 61131-9 with 230.4 kbit/s. Parameterization and device diagnostics are performed by the
IO-Link master according to the
IO-Link Interface and System Specification
, Version 1.1 of the IO-Link group of
companies.
The technical guidelines for setting up the IO-Link network of the PROFIBUS User Organization (PNO) must be
observed for safe operation.
Intended use is deemed to include observance of the relevant Operating and Maintenance Instructions and adherence
to the service and maintenance stipulations.
2.2 Use for a purpose other than the intended purpose
Any use other than
_
that described as the intended use and
_
that described in the relevant documentation
is not compliant with the intended purpose and is therefore not permitted.
The manufacturer shall not be liable for damage incurred as a result of use other than for the intended purpose.
Any risks associated with use other than for the intended purpose are the sole responsibility of the user. Use of the
product and, if present, its components other than for the intended purpose is understood to include:
_
Its use for applications not explicitly approved by the manufacturer. In such cases it is imperative that you
observe the information contained in the safety notices in the associated documentation!
_
Constructional modifications to the CCM that destroy the original condition.
_
Inappropriate programming or configuration of the system.
_
(The responsibility and liability for any risks associated with the programming and configuration of the system
lies solely with the user.)
_
Never subject the product to impermissible mechanical loads. Never use the product as a handle or a step.
Never place any objects on the product.
_
Do not work with the product in potentially explosive environments containing flammable liquids, gases or dust.
_
The device is not to be used in the area of intensive UV radiation (e.g. disinfection lamps or similar radiation).
_
Permanent contact is not permitted.
_
Do not open the sensor. Check the safety lacquer or safety screw.
