Operating Instructions
Page 13/60
2.5 General obligations on the operator
The operator is the person who either operates the machinery for commercial or business purposes themselves or who
makes the machinery available for use by a third party. When the product is used, the operator must ensure that:
_
the currently applicable occupational safety regulations are observed and implemented,
_
a risk analysis is performed to identify risks associated with the working conditions at the deployment location,
_
operating instructions for operating the product are available,
_
responsibilities for installation, operation, rectification of faults, maintenance and cleaning have been
unambiguously defined and assigned,
_
all employees who use the product have read and understood these Operating Instructions,
_
training is provided for staff and that they are informed of hazards at regular intervals,
_
the necessary protective equipment is provided for the staff,
_
the safety and danger notices on the machines/system are observed when the product is in use and that the
notices are in a condition that allows them to be easily read,
_
any applicable national regulations, standards and requirements are observed and adhered to.
2.5.1 Monitoring behaviour
The operator is obliged to monitor the behaviour of the staff in respect of their awareness of safety and risks at l east
occasionally.
2.5.2 Selection and qualifications of staff, basic obligations
Responsibility for assembly, installation, commissioning and operation must be clearly defined.
Staff who are undergoing training or instruction must be supervised.
Persons who are charged with assembling, operating, dismantling or maintaining products must not be under the
influence of alcohol, other drugs or medicines that have a negative impact on their reactions.
2.6 General safety instructions
_
Observe any accident prevention and environmental regulations that apply in your country.
_
Observe the safety regulations and stipulations that apply in the country in which the product is used.
_
Persons who are charged with assembling, operating, dismantling or maintai ning products must not be
under the influence of alcohol, other drugs or medicines that have a negative impact on their reactions.
_
Only use accessories and replacement parts that have been approved by the manufacturer.
