Operating Instructions
Page 10/60
2.3 General notes on use
2.3.1 Qualified personnel
The product may only be used and work on the product may only be carried out by qualified personnel.
Qualified personnel are persons who by reason of their training, experience, instruction and their knowledge of the
relevant standards, regulations, accident prevention rules and working conditions have been authorized by the person
responsible for the safety of the machine or plant to perform the appropriate activities required. They are able to
recognize and prevent potentially dangerous situations.
2.3.2 Changes to the programme
Do not make any changes to the programme (software) on the programmed system. The responsibility and liability for
any risks associated with the programming and configuration of the system lies solely with the user.
2.3.3 Replacement partsc
Only use spare parts that comply with the requirements laid down by the manufacturer and/or supplier. This condition
is always fulfilled with original replacement parts. Product liability shall cease, and the warranty shall become invalid
in the event of repairs which are carried out improperly and the use of incorrect replacement parts.
2.3.4 Technical condition
The product may only be used if it is in sound technical condition. Any malfunctions that are detected, in particular
those which could compromise safety, must be rectified without delay. Any damage that gives cause for concern that
the product may not function correctly must be inspected by specialist staff to ensure that it does not impact on safety.
In cases of doubt, the manufacturer must be contacted ([email protected]).
2.3.5 Compliance with regulations
It must be used in accordance with its intended purpose, in a safety-conscious and risk-conscious way and in
compliance with the relevant regulations. The operator must ensure by suitable organizational and instruction
measures that the relevant safety regulations and safety rules are observed by the persons entrusted with the
operation, maintenance and repair of the product.
